ACC FEATURES
UNIT STANDARD FEATURES INCLUDE:
-EXTREMELY COMPACT UNIT ALLOWS THUR-WALL INSTALLATIONS |
-HIGH AND LOW PRESSURE SAFETY SWITCHES PREVENT OPERATION OUTSIDE NORMAL CONDITIONS |
-LOW AMBIENT LOCK OUT SWITCH PREVENTS COMPRESSOR OPERATION IN COLDER WEATHER |
-INSTALLED HIGH CAPACITY FILTER DRIER KEEPS THE SYSTEM CLEAN AND FREE OF MOISTURE |
-CABINET ENTRY POINTS LOCATED IN BOTTOM, BACK, AND SIDES ALLOW FLEXIBLE INSTALLATION |
-PRE-CHARGED WITH R22 FOR 25' OF LINE SETS |
-UNIT MOUNTED BRASS SHUT OFF VALVES WITH ACCESS PORTS FOR FIELD EVACUATION AND CHARGING |
-CORROSION RESISTANT PRE-PAINTED CABINET EXTENDS UNIT LIFE |
-SEALED MID-PLATE FORMS BARRIER TO PREVENT TRAPPING OF WATER WITHIN UNIT |
-EASILY REMOVABLE BLOWER/MOTOR ASSEMBLY FOR MAINTENANCE |
-1" DUCT LINER INSULATION ON MOST SURFACES TO REDUCE THERMAL LOSSES AND TO REDUCE SOUND LEVELS |
-ALL COMPONENTS ARE EASILY SERVICED FROM REAR ACCESS PANEL OF UNIT |
UNIT TECHNICAL INFORMATION
MODEL |
POWER INPUT |
FAN FLA (AMPS) |
FAN HP |
COMP. FLA (AMPS) |
MIN. CIRCUIT (AMPS) |
MAX FUSE (AMPS) |
DISCHARGE LINE SIZE |
SUCTION LINE SIZE |
| ACC-18V | 230 VAC | 2.4 | .33 | 7.4 | 12.2 | 20 | 3/8" OD | 5/8"OD |
| ACC-24V | 230 VAC | 3.6 | .5 | 9.6 | 15.2 | 20 | 3/8" OD | 5/8" OD |
COOLING CAPACITY / PERFORMANCE
DESIGN CONDITIONS ARE: COOLING RA 75 DEG. F, OAT 95 DEG. F. ALL CAPACITIES ARE IN BTU/H.
MODEL |
EVAPORATOR AIR FLOW RATE REQUIRED CFM |
TYPICAL CONDENSER COOLING CAPACITY (BTU/H) |
FACTORY REFRIGERATION CHARGE |
DESIGN LINE LENGTH |
| ACC-18V | 600 | 18,000 | 4.0 LBS. | 25' |
| ACC-24V | 800 | 24,000 | 4.0 LBS. | 25' |